Setting up your neon desk light is easy! Simply remove the base, adapter, and glass design from the packaging and follow the instructions below.
Setting Up Your Neon Desk Light
- Set the round base on a level surface
- Carefully insert the glass neon tube into the base by holding the base with one hand and applying gentle pressure on the plastic end piece until the tube clicks into place. Do not apply force on the glass tube
- Plug the included DC adapter into the base and then into an indoor power outlet
- Turn on the lamp using the switch on the base
Please Be Careful!
Only use the black plastic part at the end of the glass to insert into the base - never insert using force on the glass. It is fragile and can easily break. Even the slightest crack will allow the neon gas to escape causing the entire light to be inoperable. The tube should insert easily without needing pressure - if you experience difficulty inserting, try turning it around.
There is a standard "front" and "back" of most designs, however, it isn't necessary for functioning for most designs.
To check if the neon glass is facing front or backward, look at the black plastic part, the backside will have two screws inserted that attach the pieces together.